While some types of wood naturally produce chemicals that help protect against this, others are highly susceptible and therefore unsuitable for use in boat building. techniques. as wood has been used in boat construction for eons, there are a raft of techniques that can be used to put vessels together.. Thousands of species of wood grow throughout the world. boat building requires a certain wood that has characteristics suitable for a marine environment. boat building wood can not be too soft, brittle, decay-prone, light and airy, or too short to fabricate necessary lengths for keels and planking.. Building a wood boat is not that tough if you do some investigation. the main thing you want to take a look at is if the plans are easy to understand. before you start searching, consider which kind of boat is the best for you..
4 wooden boat building techniques. there are four basic wooden boat building construction techniques used by home boat builders. these are the stitch and tape, the ply on frame, the strip planking, and the clinker ply.. A well-known type was the zeeland clipper. before 1930 the wooden fishing boats were built as sailing boats. around 1930 more and more wooden fishing boats became motorised. the wooden boats turned out not to be so good at withstanding the vibrations from the engines and often started to leak.. Clinker and carvel – different types of planking introduction. clinker is a method of constructing hulls of boats by fixing wooden planks so that the planks overlap along their edges. the overlapping joint is called a land..
